How to use the Kaiser Film Recoverer (despite what the manual tells you)

- by
Item #4132: The Kaiser Film Recoverer. Please ignore the manual.
Item #4132: The Kaiser Film Recoverer. Please ignore the manual.

So I bought this film retrieving device the other day. When film gets fully retracted into a 35mm cartridge, it’s a bit of a nightmare to get it out. I tend to pry it open with a screwdriver, but professionals seem to have a different tool.

Available at Process Supplies for a mere £3, I couldn’t resist.

Trouble is: the manual tells lies, or let’s just say it’s a bit sketchy, and by following the steps, the film doesn’t come out.

Over some blood, sweat, tears, grey hairs and cold coffee, I found out how it works:

  1. Hold your film canister with the spool to the top and the slit opening to the left. That’s half the way to success already!
  2. Wind your film into the spool a few turns (that’s counter-clockwise, if you look at it from the top, with the spool sticking out)
  3. Hold the film retriever with the tongues to the left, and the grip to the right. Slide the knob to the right (i.e. position A as the manual says)
  4. Your film retriever has two tongues and a hard plastic back bit. Insert both tongues (the big one and the small one) into the spool. Do NOT insert the hard plastic bit.
  5. Wind the film counter-clockwise, until you hear a slight “tick” noise. That’s your film slipping off the small tongue. DO NOT move the knob on the retriever grip, despite what the manual tells you!
  6. Now, wind the film the other way (clockwise), until you feel a bit of resistance. The goal here is to slide the film under your small tongue.
  7. Insert the small tongue by moving the knob into position B (i.e. towards the film spool). This should now capture your film between the two tongues. You should hear some crackling noises in the film canister, indicating that the little hooks on the tongue slide over the sprocket holes. Sweet!
  8. Retract the grip from the film canister, and in an ideal world, some film should pop out.
  9. Celebrate!

If you do it like the manual tells you, failure is guaranteed – which might have a serious impact on your creativity.



If you enjoy my content, please consider supporting me on Ko-fi. In return you can browse this whole site without any pesky ads! More details here.

8 thoughts on “How to use the Kaiser Film Recoverer (despite what the manual tells you)”

  1. Thank you so much – I spent something like 30 minutes trying before I found your how to. Using it took just 2 minutes to pick the first film and within the next minute three more 🙂 Now I’m just celebrating.

    Reply

Leave a Comment