First Flush: I’ve shot some PX100 in my new Polaroid 600 camera

Today is a very special day for various reasons: not only has my Polaroid 600 Extreme camera arrived (the one I bought for £2.50 off eBay). Also, both me and my wife are off together – it rarely happens these days. That alone was reason to celebrate.

But more importantly: The Impossible Project have today released their brand new PX600 Silver Shade Instant Film which is made for just these cameras! I put an order for 12 packs in immediately and can’t wait to give it a try.

In the meantime however, I pondered over the question “does the PX100 work in Polaroid 600 cameras” or rather “does an SX-70 film work in a Polaroid 600 camera” as discussed in my previous post.

I’m happy to say that YES IT DOES – with a minor modofication to the camera.

Let me show you the results and talk you through my experiences with this exciting new material.

The Polaroid 600 Extreme

Camera: £2.50 - Film: £20 for 8 exposures. Ouch!

As I said, £2.50 for my very first Polaroid camera was a bit of a bargain. It even came in its original box and looked brand new to me – even though the rollers inside gave reason to believe it’s seen some use in its time. According to the box it was built in February 1998 in the UK (Vale de Leven, Dumbarton in Scotland to be exact) under license by the Polaroid Corporation in Cambridge, MA (USA).

It’s much bigger than I remember my parents’ Polaroid and I can’t help but feel reminded of my Holga cameras: we’re dealing with a pretty ugly hunk of black plastic here, cheap plastic lens, ridiculous “close-up” slider and a lighter/darker feature which obscures the light meter with a piece of striped plastic (or doesn’t – depending on where you slide it).

I think the seller told me it was £29.99 when it came out so that’s pretty much the price of a Holga too. Great – I love it already, and it’ll feel right at home in my collection!

PX100 Silver Shade First Flush Edition

Trouble is that the Impossible film pack I’ve bought the other day is not made for this camera, but for Polaroid SX-70 models. From what I’ve learnt however the only difference is the film speed: PX100 has 100 ISO and my camera is expecting a 640 ISO film.

Light Meter gets ND2 shades

Easy solution: tape a piece of ND filter over the light meter and be done with it. I’ve used one that darkens incoming light by 2 stops. That should do the trick.

All that’s left is to pop the film in and see if it fits. Listen carefully:

YES IT DOES!

The limited edition darkslide pops out just as expected, so the camera works too. That’s another load off my mind. Just one more thing perhaps: I’m shooting on First Flush batch no. 43 here 😉

Next thing to do of course is hand the camera over to my wife and have her take a picture of me (see below).

Let’s see some pictures

Be my guest! I only had one single pack of PX100 because I didn’t know if anything would come out, so 8 exposures were all we had to test this puppy. On a fairly sunny day with spots of overcast-ness (if that is a word) we took a stroll in the afternoon through the hood and here’s what we shot:

Julia took this first shot of me proudly holding my first ever Limited Edition Darkslide. Shot with flash in front of a sunny window.

My first shot, flash fired, close-up lens used. It's indoors without artificial lights. I think some Flash wet wipe cleaner was still on the rollers hence the smudge on the left. Dark parts of the picture have turned orange, which didn't come out in the scan. Interesting!

About Jay Versluis

Jay is a medical miracle known as Super Survivor. He runs two YouTube channels, five websites and several podcast feeds. To see what else he's up to, and to support him on his mission to make the world a better place, check out his Patreon Campaign.

66 thoughts on “First Flush: I’ve shot some PX100 in my new Polaroid 600 camera

  1. Hi Jay.
    I’ve received your helpful comment on 360 spinning camera last time and I need you again. I’ve purchased sx 70. And wondering if 600 film will work for sx 70.
    So the proper question would be:
    “Does a Polaroid 600 film work in a SX-70 camera?”
    If the answer is yes, that’s great! if no.. oh.. I only have one choice of film.
    I want to shoot in Black and White as well..

    1. Hi Kate,

      congratulations on your SX-70 purchase 🙂 You’ll love the results this magical camera can give you.

      Yes 600 film will work – but you’ll have to keep the following in mind: The difference between (original) Polaroid 600 and (original) SX-70 film was only the sensitivity: 600 film has 600 ISO, SX 70 film has 100 ISO. Hence an SX-70 camera will be expecting to expose a 100 ISO film. If you’re using 600 film then you’ll have to either turn down the lighten/darken slider all the way to dark, or alternatively use an ND filter over your lens to take off one and a half stops of light. Only cover the lens, not the electric eye. There is a circular filter available that you can use for about £10 (from A-Power I believe.
      On the original cartidges there was another difference, namely some extra nubs on the cartridge which would prevent the frilm from sliding into SX-70 cameras. You can cover those with a darkslide and insert it though. On the Impossible cartridges they’ve removed them so you can use either film in either camera physically – which is very nice.

      If you’re looking into Impossible film, then the PX 100 and PX 70 are your choices for SX-70 type cameras. The PX 600 and PX 680 are ISO 600 and hence will work in 600 cameras, however you can use them in your SX-70 with the filter I mentioned as well.

      Hope this helps – and happy instant shooting 😉

      PS: I’ve been to the Impossible Factory in Enschede a couple of days ago – we did a tour and spoke with Andre Bossmann – it was such a blast!

      1. Thank you again for detailed and professional reply.
        Thank you so much. I live in Australia and currently in New York.
        It is time for me to buy Impossible films here. I need to. It’s too expensive in Australia. I was about to get PX 70 originally but I also want to shoot black and white and Impossible do not have black and white films in sx 70.
        Of course, you solved the problem! Yay~ I will purchase the filter when I get home.
        Thank you again!!!

        p.s 600 films are cheaper than sx70.

        1. Yes I’ve noticed that – it’s probably because there’s more demand for 600 film than SX 70 film. The Impossible Website has some good offers on triple packs at the moment – but if you’re in New York tright now you HAVE to check the NY Project Space on 425 Broadway. They may have even better offers there like inor rejects. I bought a 4 pack of PX 680 rejects which – considering the arty quality of the material – only adds to the weirdness 😉

        2. Hey I’ve just found another filter so you can use your 600 films in your SX 70 camera: instead of putting it over the lens, this one can go over the actual film pack, hence your viewfiner won’t get darker when you’re framing. Have a look at this: http://shop.the-impossible-project.com/shop/accessories/ac_nd_filter_twin

          I’ve not used it yet because I’ve only just discovered it – but it’ll certainly go on my shopping list right now!

          1. Jay! You are actually saving me.. some cash here.
            Thank you so much!
            That NY project space is same building as Impossible.
            Is that one below or what level is it. I try to find it in internet seems like it doesn’t exist. I am going to go buy some Impossible and try to find the store that you’ve mentioned.
            Thank you so much! definitely that filter is also in my list.
            Thank you

  2. Hey Jay

    This is super exciting. My boyfriend found a camera in a skip in Manchester, UK a while ago. He just dug it recently to show me simply because it looked pretty cool. He had little idea how it worked or whether there was film still available. Its an SX-70 and appears in very good nick. I thought it would be a fun project for me to do some research to see if it was viable and it would make a fabulous Xmas present if I could get it working. The wealth of information you have provided here and the simple, user friendly way in which it’s presented has given me the impetus I need to get started. I think Impossible should be providing you with a Xmas bonus!!!

    Are you aware of a manual bring available for this model at all?

    Best wishes and thank you so much. Jo

    1. Hi Jo,

      how exciting – what a find, and in a skip of all places 😉 Enjoy the SX-70, I take mine everywhere I go – and even the most mundane objects turn into fantastic Polaroid artworks.

      Thank you for your kind words about my website! The closest thing to a Christmas present Impossible would get me is if you sign up with them and order something for yourself – it’s pricey but worth it. I’ll send you an email to sign up – if you do, you count as my “spirit” and they’ll improve my Pioneer status (which gives me discounts to their films and access to the beta testing programme). Your camera will like the PX 70 film they have on offer – it’s designed to work without modifications in your camera. The PX 600 and PX 680 films need a filter to work. All of them produce surreal results – treat yourself and take some breathtaking art with your “new” camera.

      All the best from London 😉

  3. Consider your pioneer spirit and status improved 🙂 I’m just about to have a rummage and place some orders. I’ll let you know how we get on with it.

    Best wishes from foggy Cambridge

  4. hi jay!
    my name is sammy, i’m a photographer from switzerland and i’ve a question: i ordered some px films too, after that i found on the internet some ” Polaroid PoGo Media Papier” but they’re smaller than the px films, 2×3 inches, can i use them too in my polaroid 600 extreme? maybe a stupid question, but i don’t know anything about polaroid cameras 🙂

    best wishes from switzerland

    1. Hi Sammy,

      there are no stupid questions, only stupid answers 😉

      The PoGo paper will not work in your Extreme 600 camera. Even though PoGo is made by Polaroid it uses an ink-less printing process to create images, not a photographic process. It’s made for those small Bluetooth printers so you can print pictures from your mobile phone.

      Hope this helps!

Add your voice