DAZ Studio Archives

3D manipulation tool for rendering people.

Where are the DMC files for Genesis 8

by

DMC files are used by Mimic and Lip Sync in DAZ Studio to make a figure move lips in response to an audio file. DMC stands for DAZ Mimic Configuration I believe, and each figure generation needs a specific file to make this work. Every figure including Genesis 3 had such a file in a …

Read more

How to access keyframes for morph dials and parameters in the DAZ Studio Timeline

by

By default, some keyframes in the DAZ Studio timeline just don’t show up. Morph dials and any other options that appear on the Parameters Tab are such culprits. We can see their effect, but not necessarily a corresponding keyframe. I’ve just found out how to make those values how up and thought I’d make a …

Read more

How to start a second instance of DAZ Studio

by

Sometimes it’s handy to have DAZ Studio render something in the background, while you’re working on the next scene in the foreground. Sadly that’s disallowed by design, even though it would be a super handy feature to have. Think how elegant the Poser Render Queue or Adobe’s Media Encoder implement such workflows. We’re busy people …

Read more

Visemes on Genesis 8.1 and how to make them work

by

I’ve been playing with the new Genesis 8.1 figure in preparation for a project. Most things seem to be working OK, and as expected – including body morphs and may expression sliders. Something that did not show up was visemes. I use them quite often to create expressions, so they’re very important to me. I …

Read more

How to add Documentation to your DAZ Studio Products

by

When you’re releasing a product for DAZ Studio, it’s a good idea to include instructions to give your users all the info they need to make the most out of your creation. You should also include a license that explains what users are allowed and not allowed to do with your product. This means you …

Read more

Using an Opacity / Transparency Map in DAZ Studio (Iray)

by

Transparency is handled differently across render engines and file formats. While a PNG, TIF or GIF file can contain transparency data, a JPG image cannot. DAZ Studio’s Iray render engine can’t handle transparency data embedded in such images and requires the use of a special Opacity or Transparency Map. This might sound a little confusing, …

Read more

What is Yaw, Pitch and Roll in 3D axis values

by

There’s a slightly weird terminology I keep hearing in various 3D applications. Those terms are Yaw, Pitch and Roll. I have trouble remembering which one is which, and which one is related to what axis in 3D space. I’m more used to the Euler notation system, and the only one I can remember is “roll” …

Read more

How to remove dForce from an object in DAZ Studio

by

I had a question from one of my supporters the other day about how to remove a dForce Modifier from an object, like hair or a dress. Turns our there are two answers to the puzzle, and I thought I’d them both here. Disabling dForce dForce is a surface property, and as such it behaves …

Read more

How to use TeleBlender 4 by mCasual / Jaques

by

Getting characters and scenes from DAZ Studio into Blender is one of the toughest things to get right. It’s an endlessly time consuming, confusion and generally un-fun process. Several scripts exist to make this happen, yet many of them fail to make it a one-click solution. Jacques aka mCasual has been working for years on something called TeleBlender. Steve aka Backdoor 3D recently did a live stream on the process, and I finally had a chance to try it out myself.

In this article I’ll show you the workflow that I found worked best for me. You may know a better way, and perhaps it’s not the intended way of working, but it thought it might come in handy (since usage instructions on the download page of TeleBlender are literally non-existent).

I’m using the following versions, which will probably no longer exist by the time you read this article:

  • Blender 2.83.1 LTS
  • DAZ Studio 4.12.1
  • TeleBlender 4 (Beta 06252020)

Read more

Why do DAZ Characters take so long to load?

by

I’ve had this question twice recently, and it’s another interesting nugget of information I thought I’d share with you: why do DAZ figures take so long to load? Especially the no-frills base figures? And why does this only happen for some users, and not for others? The two guys who contacted me about this (Richard …

Read more

How to completely reset DAZ Studio and Install Manager

by

I was talking to a viewer recently about how he had made some changes in his DAZ Studio installation by manually moving folders, and as a result, nothing appeared to be working anymore: Install Manager didn’t show any content, DAZ Studio didn’t either, and a complete reset was in order. I mentioned briefly how this could all be reset during a Stardew Valley stream, and the information was so helpful that I thought I’d share it as a stand-alone clip.

When I was done editing, I thought perhaps some written instructions on this process might be a good idea, so here they are. This is all I know about how to completely reset your DAZ Studio Installation. Use it as a last resort if nothing seems to be working anymore and you’d like to start with a clean slate.

Note that these steps will remove ALL traces of ALL versions of DAZ Studio and Install Manager from your system!

Read more

My Animation Workflow in DAZ Studio – The Basics

by

I often get questions in regards to Animations in DAZ Studio. It’s a complex topic, because it combines “animating in general”, and “using the animation tools in DAZ Studio”. I recently described my animation workflow to a reader/viewer (Nkem) and thought this information might be useful to others too, so here’s what I said.

Most new users have an issue with the time it takes to both build the animation itself, but also the enormous time it takes to render an animation out. Something relatively short and simple like this is a good example:

Aside from the setup, rendering an animation frame should be treated differently to a still image. We need to live with compromises, because we’re rendering quite a few images (30 frames per second, on a 10 second animation, that’s 300 images). If each of them would take 6 hours to render, the whole thing would take about 75 days, or nearly 3 months. And that’s a very short animation.

Let’ see how we can trim that down to a few hours or less instead.

Read more

Using non-native 3D content in DAZ Studio

by

I get a question every now and then that goes something like this:

I bought content from (non-DAZ store), but I don’t know how to use it in DAZ Studio. Can you help?

It’s a complex situation, so perhaps I can shed some light on it. Let me explain the basics of what’s happening here, then we’ll move on to the process of making a compromise work.

First of all, transferring content between multiple 3D applications is a pain. You’d think for an advanced society like us there would be a “universal format” of all things 3D, but sadly that’s not the case. Every 3D professional is struggling with this fact. If you’ve ever tried formats like FBX, Collada, OBJ or Alembic, and have been disappointed with how they transfer content, then you’re not alone. They all work to a certain extent, but usually not perfectly.

Most 3D applications (DAZ Studio included) can import 3D objects from other applications and display them somewhat. The trouble lies not in the 3D shape of an object, but mostly in the material descriptions. These are very much dependent on the render engine for which the source object was intended. Hence, while the diffuse texture map is usually imported correctly, none of the other parameters are (such as bump, transparency, normal, etc). Furthermore, the material properties (like shiny, rough, translucent, emissive etc) are not working, because each render engine has different ways of describing such properties.

Read more

Removing x-translation wobble when converting keyframes to aniBlocks

by

When you convert keyframes to an aniBlock, there’s a phenomenon that can happen in that the figure seems to sway left/right. It’s not something that is present in the keyframe animation, and I’m not entirely sure why this happens on conversion. The above shows how Darius 7 does his keyframe funny walk, while the bottom shows what happens after conversion to an aniBlock. In a word: terrible!

aniMate is a powerful tool, and in this article I’ll take a look on how to fix such shenanigans.

Read more

How to apply Mixamo Animations to Genesis 3 and Genesis 8

by

If you’ve ever tried to upload a G3 or G8 character to Mixamo, you’ll have noticed that it’s a complete and utter nightmare. Seemingly nothing will work in the plethora of export options, and a ton of time has been wasted globally, leading to anger, depression and frustration. In short: the stuff us creatives can’t …

Read more

Octane for DAZ Studio – render tests

by

In a recent stream I got accustomed with some of the options of the Octane Plugin for DAZ Studio. It’s easy to get brain overload with so many sliders! After some fiddling though, I discovered how to render the final image. However, there appear to be four different types of options on how to achieve that. These are:

  • Direct Lighting
  • Path Tracing
  • PMC
  • Info Channel

Rather than read the manual, which I’m sure would explain what the difference between each option, I did a few test renders of the scene we built. Let’s see if we can visually detect any differences.

The renders below were done at 2000×1500 with the built-in denoiser, which kicks in at the end of the image. Until that point, minor grain is visible. These were saved as 16 bit PNG files (click to enlarge).

Read more

DAZ Studio 117 – Global Illumination, Environment Lighting, IBL and HDRI explained

by

In this episode I’ll tell you much of what I know about the Environment Lighting in DAZ Studio. This technique is also known as Global Illumination. I’ll explain the meanings of such cryptic abbreviations as IBL and HDRI, and how all these pieces fall together to make your scenes look handsome. This is a continuation …

Read more

Distributing Props for DAZ Studio

by

Making props for DAZ Studio can be fun and easy. Typically you’ve modelled something in your favourite 3D app, UV unwrapped it appropriately, then you import the object into DAZ Studio and setup your surface properties. You can save your work as part of the whole scene, or you can save your selected item on its own.

Bringing our prop back into other scenes on your own computer will probably work just fine, but if you intend to share your work with others, things get a little more complicated. Let’s take a look how we can do it in this article.

Read more

DAZ Studio Render Speeds – The Results are in!

by

A while ago I’ve asked you all to download a test scene and see how fast it renders. Everyone’s got a different graphics card/RAM/CPU setup, and I was interested to see how DAZ Studio would perform with those varying configurations. After all, most “review” websites only put hardware under scrutiny using video games, and for many of us, that’s just not how we use our systems.

I must admit that I’ve been trying to write out a nice looking and well formatted table many a time, but it just never got done. It had always been my intention to share the results with everyone, so rather than keep you waiting and go through all the graphical pain of making a lovely looking spreadsheet, I’ll just share the raw data with you. I’ll also let you know how I interpret it in simple words, with the intention of finding the most cost effective configuration for working with DAZ Studio. Here it is – the Google Sheet we’ve all been waiting for:

This is a view-only link (I think), and additional submissions will be added from the form on my other article at the bottom.

What does this data mean?

From the looks of it, using DAZ Studio 4.11 in 2019, the fastest render results for the lowest amount of money can be achieved using any variation of the NVIDIA RTX 2080 card.

The only one faster is the RTX 2080 Ti, which aside from more RAM (11GB vs 8GB for the 2080) is also clocked slightly faster, resulting in faster render speeds. However, the price jump is remarkable for the Ti (almost double when compared to the non-Ti version), and in my opinion for DAZ Studio it’s just not worth it.

Read more

Converting aniBlocks into regular keyframes (and back)

by

In this quick tip I’ll show you how to convert an aniBlock into regular keyframes to make a change to the animation, then turn it back into an aniBlock for use with aniMate. The process is simple, yet not exactly obvious. Enjoy! https://www.versluis.com/wp-content/uploads/2019/07/Aniblocks-to-Keyframes.mp3 Podcast: Download (Duration: 4:54 — 4.5MB)

DAZ Studio 4.12 Beta – a Sneak Peek – 3D Shenanigans #25

by

On today’s stream I’ll take sneak-peek at the new features in the brand new beta version of DAZ Studio 4.12. It was released earlier this week, and it’s all about better animation tools: integrated features from GraphMate and KeyMate, and IK Chains inside a scene hierarchy. The highlights in this version are: overhaul of the …

Read more

DAZ Studio 115: Parametric Light Objects in Iray

by

In this episode I’ll give you an introduction to the various parametric light objects we can create from the menu, how to use them and how to tweak their respective parameters as they apply to the Iray render engine. Here’s the link about Colour Temperature I’ve mentioned: https://en.wikipedia.org/wiki/Color_temperature Here’s the one about Luminous Flux: https://en.wikipedia.org/wiki/Luminous_flux …

Read more

Editing DAZ clothing using a reference figure in ZBrush

by

Even though I own it, I know very little about ZBrush. It may forever remain a mystery for me – like driving a car or getting excited about Team Sports. It’s just… not for me. Be that as it may, I’ve often wondered how clothing manufacturers use a character as a reference to make or update clothing geometry in ZBrush. Perhaps a jacket that doesn’t quite fit, or some boots that need a quick adjustment.

The challenge here is that both the character and the clothing need to be imported into ZBrush, and we need to be able to adjust the clothing only, while seeing the character in the background as a reference so we can work around it.

While the art of sculpting in ZBrush entirely eludes me, I believe I have finally understood the overall workflow. Before I forget it again, I thought I’d share it with you and my future self. Let’s see how we can transfer a clothed Genesis 3 figure from DAZ Studio 4.11 into ZBrush 2019.1, make adjustments on an item, and then bring it all back with a few clicks.

Read more